2016 Peterbilt 348
CUSCO DOT INDUSTRIAL VAC LIQUID RING, EQ#12332
Tanks designed and constructed in compliance with Section VIII Division 1 ASME Boiler and Pressure Vessel Code, and DOT specifications 407/412 and TC 407/412. National Board Registered.
-20 to 200 degrees F
HYDROSTATIC TEST PRESSURE:
4" SS Girard pressure vent, 25 PSIG MAWP setting mounted top of tank.
6" internal shut-off with 9" SS float ball and cage assembly with neoprene rubber seat top front of tank.
One anti surge mounted on reinforcing pad – bolted.
Circumferential reinforcement rings with tank support feet.
Front, center, and rear 4" pipe construction overturns with reinforcement pads and gussets; c/w overturn rings.
20" diameter located top of tank.
LIQUID LEVEL INDICATOR:
Stainless Steel construction rotary float gauge with 6” float ball assembly located on rear head.
Hydraulic full opening rear door assembly with 6 heavy duty door bolts, neoprene rubber rear door gasket, double acting hydraulic cylinder and safety brace.
4" ANSI Betts air open/spring close valves and Betts actuator with 4” sand pipe / deflector plate assembly, aluminum Kamlok fittings mounted on rear head at 4 o’clock position.
6" ANSI Betts air open/spring close valve and Betts actuator with aluminum Kamlok fittings mounted on rear head. Located at 6 o’clock.
6” air operated butterfly valve between primary and secondary shut-off with PTO interconnect.
Single 6" diameter no disconnect piping to allow tank to dump with vacuum system connected with vacuum pump flush port and wire reinforced rubber hose.
VACUUM PUMP SPECIFICATIONS:
Samson KM-2200 Liquid Ring Assembly
Cyclone moisture trap assembly with drain valve, 12” swing out bottom clean out and
6” exhaust adapter.
Hydraulically driven from air shift PTO mounted on transmission with remote mount hydraulic pump, motor and oil cooler.
Mounted on chassis side with suction strainer, diffuser, fill cap, hydraulic oil filters and sight glass.
HYDRAULIC DUMP SYSTEM:
Full length hydraulic dump sub-frame with 20 ton, single acting dump cylinder, rear dump pivot assembly and safety brace.
4-spool valve body for control of hydraulic dump, rear door and vacuum pump.
Glycerin filled vacuum/pressure gauge and hydraulic pressure gauge.
Full-length side boxes for hose storage / fender assembly with anti-sail mud-flaps and rear tire skirt.
DUAL HOSE HOOKS:
Dual rear mounted hose hooks
Ladder assembly, four numbered placards, 50' static line and steel toolbox assembly.
DOT LED moisture proof lighting conformant to FMVSS 108 with (3) three in a row clearance markers, clearance lamps, reflectors, upper license plate mount and light assembly, (1) rear amber strobe beacon, and (2) rear facing rectangular halogen flood lights.
DOT rear bumper for protection of external valves with platform/step assembly and rear dirt shield.
HEATED JACKETED VALVE
Installed on rear valves for future installation of heated valve option
ADDITIONAL ITEMS INCLUDED:
- Tank Tie Down Lock Included
- Roda Deaco – Emergency Shut Off System
2016 Peterbilt 348 Chassis, PACCAR ISL9 Engine, 350HP, and Allison 3000RDS Automatic Transmission
Give Us A Call For More Sales & Rental Information