Available Inventory

2014 Vactor HXX HydroExcavator PD

Click Image to Enlarge

General Details:

EQ #:7399
2014 Kenworth T800
Detroit Diesel DD13
Vacuum System:
Hibon 8702 Tri-Lobe ( 28" HG ) 5150 CFM
GPM / Pressure:
10 GPM @ 2500 PSI
80,000 lbs


2014 VACTOR Hydro-Excavator EQ #7399 having Positive Displacement (PD) Blower driven from chassis engine, 12 cubic yard debris  hopper and 1200 gallon water capacity

Hydro-Excavator Standard Module   
Debris Body   
12 Cubic yard volumetric debris body   
Cylindrical design, 1/4" abrasion & corrosion resistant Ex-Ten steel   
Flat style, 3/4 rear door, hinged at top w/replaceable neoprene seal   
Vibrator mounting bracket only   
Hydraulic rear door locking system with door grabber   
Hydraulic rear door open & close system   
6" Knife valve with 10' drain hose, cam-loc connector   
8" Inspection port, Top mounted with ladder for easy access   
Rear door support for operator safety   
Front mounted hydraulic dump cylinder, 50 degree dump angle, power up/power down   
Water Tanks   
1200 Gallon capacity insulted, structural foam & polyethylene water tank   
Water tank separate from debris tank   
Includes anti-siphon device & anti-splash valve w/25' water fill hose and connectors   
Water level sight gauge, Mark III electronic low water warning system   
5 Year warranty against leaks   
Water System      
Water system rated design is 10 gpm @ 2500 psi   
Hydraulic operated Tri-plex piston water pump   
Water pump on/off located on pendant control and control box   
Variable pressure and flow achieved by electronic-over-hydraulic controls at operators station   
Handgun hose 3/8" x 75' w/operating pressure of 3500 psi and burst pressure of 14,500 psi, located in heated cabinet.   
PD Vacuum System   
Hibon 8702 Tri-Lobe ( 28" HG ) 5150 CFM @ Max. Speed 2000 RPM   
Ultra Quiet Inlet and Outlet Silencers Acoustically Matched to Blower   
Direct Drive Omsi Transfer Case   
Dual Cyclonic Separators with 12" clean out door   
Microstrainer Final Filter with 3" Camlock drain   
Vacuum relief located in the inlet of debris tank to allow operator to vent to atmosphere.  Pendant control operated.   
Remote push button pendant control w/75' cable with a vacuum relief, water on/off and throttle control   
Control Panel (Located Passengers Side)   
Located inside an aluminum box for protection   
Vansco-Electronic Package includes: chassis tachometer, operating mode, PTO mode, hydraulic oil temp indication, water temp indication, and blower temp indication.  E-Stops will disable vacuum, throttle chassis engine to idle, turn off water pump, and disable hydraulics.  E-Stops located at all HMI points (control panel, wireless remote, optional corded pendant).  IntelliView display includes Machine Functions and Diagnostics (Chassis and Module).   
Boom & Vacuum Hose   
7' Hydraulic extendable boom/top mounted with 320 degrees of rotation   
8" I.D. wire reinforced rubber suction hose    
Boom will have an electric-over-hydraulic solenoid system with speed flow control valves   
Boom will be powered hydraulically up/down/right/left/extend/retract   
Boom control, joystick and hand carried pendant control w/75' cable located at operator station   
All boom inlet hose and tubing will be 8" inside diameter   
Vacuum Pipe Package   
"Package will be:
(1) 8"" x 7' aluminum fluidizer tube with rubber safety end
(2) 8"" x 6' aluminum flanged pipe
(2) 8"" x 3' aluminum flanged pipe
(5) 8"" quick clamps"   
All connections between debris body and vacuum system will be self-adjusting, pressure fitting type   
Water System/Pipe Package   
(1) Digging wand
(1) dual nozzle assembly
(1) triple nozzle assembly
Quick couplers and shut-off valve
(3) Extension pipe assemblies totaling 20'"   
Hydraulic System   
Hydraulic reservoir capacity of 50 gallons w/strainers on all suction lines.   
Oil level sight gauge   
Inspection hatch for maintenance   
10 micron spin on type filter   
Entire system will be moisture and vapor sealed   
Electrical connections require no exposure wires or terminals   
Light bulbs will be shock mounted   
Complete wiring diagram is provided with machine, circuit breakers are supplied   
Storage Cabinets   
(1) 50"L x 30"D x 30"H Aluminum tool box located behind cab passenger side. Water pump and retractable handgun hose reel will be located in this box.   
Approved truck chassis   
All metal surfaces shot blasted prior to painting   
All metal surfaces will be phosphate washed prior to painting   
Coated with a minimum of 2.5 mil primer   
Painted with a minimum of 2.5 mil finish paint process   
Module components will be painted prior to assembly   
Tow hooks front and rear   
Mud Flaps   
Electronic back-up alarm   
Spring Loaded Ground Reel   
Factory Training and Start Up   
Debris Body   
Folding pipe rack, rear door   
Rear Door Splash Shield   
Electric vibrator - debris body mounted   
Sludge pump off-load system   
Water Tank Accessories   
Air Purge System Utilizing Chassis Air System   
Water Heater   
800,000 BTU water heater  Includes: inverter and chassis must have minimum 160 amp alternator   
Cold Weather Package   
Cabinet Heater, Drain valve donut heater and Insulation Package   
Boom Accessories   
Remote push button pendant control with 75' cable with a vacuum relief, water on/off and throttle control   
High Pressure Water Pump   
20 GPM/2500 psi Single Cat triplex pump (Requires 940K Heater, & Min. 160 Amp alternator)   
Glycol Anti-Freeze System   
Hose Reel Accessories   
Hydraulic Shut-Off Valves On Suction, Return And Filter Lines   
Front Station And Controls   
Second operator station:  Includes additional hosereel rear mounted with second handgun, plumbing & fittings.  ( Front and Rear station, 10 gpm water pump is standard.)   
Light Accessories   
Hand Light W / Retractable Reel   
Revolving Light Rear Mounted   
Revolving Light Front Mounted    
Work Light At Operators Station (One Only)   
Work Lights On Extendable / Telescopic Boom (Two)   
Work Light / Rear Door   
Tool Box - Vactor & Chassis Accessories   
Chain rack for tire chains (mounted on frame rail - one per side)   
High Altitude Nozzle   
18" wide x 24" deep x 48" high aluminum tool box, maximum of 2 per truck.  1 - located left side behind tandem, 1 - located right side behind tandem (Recommended Option- 1 Mounted on Right Side )   
104" X LONG X 24" Deep X 24" High Aluminum Tool Box/Maximum Of (1 Either Side) Of This Tool Box May Be Selected/Tool-Box Mounts Above Rear Tandem  (Recommended Option-1 Mounted on Right Side)    
Module - Wet on Wet    
BODY COLOR:  White   
CAB COLOR:     White   
"2014 Western Star 8x6 Tri-Drive, Detroit DD13, Allison 4500 Transmission"   

    Give Us A Call For More Sales & Rental Information

    All advertised prices exclude government fees and taxes, any finance charges, any dealer document preparation charge, and any emission testing charge. Vehicles are subject to prior sale. All advertised to be true but not guaranteed.