Available Inventory

2014 Custom Vac CV822

Click Image to Enlarge

General Details:

EQ #:70
VIN #:5KKPALD60EPFT3994
Chassis:
2014 Western Star 4900SB
Engine:
Cummins ISX 15
Vacuum System:
Hibon VTB-820

Specifications:

Custom Vac – CV822 Hydrovac System, EQ #000000070, TC 407/412 and CSA B620-03 with the following specifications:

Debris Compartment:
Tank diameter 78” x 12’
78” x 5/16” F & D heads
78” x 5/16” Shells
Formed tank pedestals
Three (3) 4” roll bars
Three (3) external flat bar rings
8” Primary shut-off assembly with 8” flanged outlet
8” isolation valve @shut-off air actuated
Recessed liquid level indicator
Full opening rear door c/w six pinwheel door locks
6” load valve c/w 6” sandpipe, aluminum camlock/cap D/S
4” in load valve P/S
12” Hydraulic flange mounted mudgate with sliding lock mechanism
4” valve with aluminum camlock/cap
All rear valves heated and equipped with air/open – spring/close air actuators with control switches

Blower Specifications:
Hibon SIAV 822
2650 CFM free air rating
27” Hg Maximum Vacuum @sea level
8’ Four-way Diverter valve (Vacuum to Pressure Mode)
8” Double door check valve (to prevent blower back spin)
Prestage filter assembly c/w 16” filter
One intake silencer, One exhaust silencer
8” cyclone with bottom cleanout door & 2” heated drain valve

Hydraulic System: Closed Loop
8 Bolt PTO for blower
6 Bolt PTO for wash
Hydraulic pump and motor for blower
Hydraulic pump and motor for Triplex pump
Tandem gear pump for Axillary functions
High torque/temp drive coupler with flex insert
Spool type valve control bank for pump and allied functions
Rear control section for door & mudgate on deck (driver side)
Joystick speed control for blower
Torque control for vac pressure
90 gallon oil tank c/w vent, site glass, filters, temperature gauge and inspection hatch
Two 12 volt oil coolers
Three (3) stage hydraulic hoist cylinder

Plumbing:
8” piping c/w 8” oil & gas loop hose
Pressure Wash System:
CAT 3560 Triplex plunger pump rated at 20gpm @ 4000psi
2” Y strainer, 1” high pressure Baird relief valve
Three Hydraulic rewind reels
100’ x ½” pressure hose
100’ x 3/8” temperature rated Steam hose
100’ x 3/8” degreaser hose

Wash Accessories:
One wash gun, wand, nozzle and quick coupler
One steam wand, nozzle and quick coupler
One 6’ hydro exposing wand c/w 4’ extension, high pressure ball
Valve and turbo nozzle
One degreaser tank assembly c/w tank, stand, pump, gun, wand and nozzle

Hot Water System:
Hotshot 980 BTU/HR heater c/w relief valves temperature gauge; Honeywell control, Diagnostic panel
3000 Pro Watt inverter
Wet Steam kit plumbed with high pressure ball valves
Safety Feature: 340 degree auto shut-off on Heater system
New style 18 GP< solid brass flow switch with no bypass line
All Stainless steel plumbing

Wash Cabinet:
Milron Aluminum Crossover cabinet c/w Large doors (driver and passenger side)
Small access door in large door for hose access (passenger side)
Heaters, LED lights and auto vent

Water Compartment
20” Manway
Stainless steel liquid level indicator assembly (passenger side)
Heated 2” valve for breather, fill and suction lines
Heated 2” drain valve air actuated, switch control at operator station
Heated 2” hard pipe supply direct connection through cabinet to triplex
Heated 2” Vac/water changeover valve air actuated

Vibrator:
Global hydraulic vibrator assembly mounted on a bottom of tank with
Reinforcement pads, heavy duty mounting channel and pressure relief valve.

Pressure Relief:
One 3” x 30 PSIG pressure relief vent
One 2” PRV in lower suction pipe
2” vacuum breakers installed on exhaust silencer

Gauges:
Gauge assembly with tank vacuum/pressure gauge, hydraulic pressure gauges.
Blower temperature gauge – remote mounted on driver side.

Frame, Deck and Bumper:
Full length subframe c/w 1/8” checker plate hose tray/fender assembly
c/w heavy duty outrigger supports, 1-1/4” tube handrails, close in plate.
Code rear bumper with light boxes and rear tire skirt
Subframe supports decking, rear hoist hinges & front hoist cradle

Cabinets:
One steel 72” three door deck box
Two rear skirt fitting boxes

Electrical:
Waterproof main circuit control box – self-contained power supply.
Sealed wire harness c/w waterproof junction boxes
LED lamps (Clearance, park signal)
Four large style work lights
Three lights on boom
Electrical system shut-down at key
Sealed rear skirt lamp modules
Stop and turn LED sealed lamp modules on top ring of door
Back up alarm
Truck cab and deck mount blower switches

Hydraulic Boom:
8 in. 270 deg. Telescopic suction boom
12” knife gate valve assembly with shear section
Accumulator assembly for knife gate code compliance
8” boom hose
One wireless remote control, functions include on/off for wash pump
Standard hard wire pendant control and plug (back up)

Additional Equipment:
Catwalk & ladder on upper suction pipe driver’s side
PTO hour meter installed in truck cab
Chain hanger, slide out style
Mudflaps
50’ ground cable (wind up style)
Ground studs mounted off rear (driver and passenger side)
30# fire extinquisher, bracket and cover
Boom hose holders (passenger side)
One 8”x6”x4’ aluminum adapter/camlock ends
Two 6”x6’ aluminum dig tubes/camlock ends, one with neoprene tip
Dig tube holder

Paint:
Sandblasted and painted with Endura paint
Devoe 233 internal coating in water compartment

Chassis:
2015 Western Star 4900 Tri-Drive w/Day Cab Chassis

    888-936-4369
    Give Us A Call For More Sales & Rental Information

    All advertised prices exclude government fees and taxes, any finance charges, any dealer document preparation charge, and any emission testing charge. Vehicles are subject to prior sale. All advertised to be true but not guaranteed.