Available Inventory

2013 Vactor HXX HydroExcavator PD

Click Image to Enlarge

General Details:

EQ #:5859
VIN #:1NKDX7EX8DJ334545
2013 Kenworth T800
Cummins ISX 11.9
Vacuum System:
Hibon 8702 Tri-Lobe ( 28" HG ) 5150 CFM
GPM / Pressure:
20 GPM @ 2500 PSI
78,350 lbs


2013 VACTOR Hydro-Excavator having Positive Displacement (PD) Blower, EQ# 5859, driven from chassis engine, 12 cubic yard debris  hopper and 1200 gallon water capacity, equipped with the following:

Hydro-Excavator Standard Module

Debris Body
12 Cubic yard volumetric debris body
Cylindrical design, 1/4" abrasion & corrosion resistant Ex-Ten steel
Flat style, 3/4 rear door, hinged at top w/replaceable neoprene seal
Hydraulic rear door locking system with door grabber
Hydraulic rear door open & close system
6" Knife valve with 10' drain hose, cam-loc connector
8" Inspection port, Top mounted with ladder for easy access
Rear door support for operator safety
Font mounted hydraulic dump cylinder, 50 degree dump angle, power up/power down
Dual air ports with dual 10" stainless steel float ball shutoff system/stainless steel screens
Complete pump-off system 

Water Tanks
1200 Gallon capacity - poly water tank
Water tank separate from debris tank
Includes anti-siphon device & anti-splash valve w/25' water fill hose and connectors
Water level sight gauge, Mark III electric low water warning system
10 Year warranty against corrosion and cracking

Water System   
Water system rated design is 20 gpm @ 2500 psi
Hydraulic operated Tri-plex piston water pump
Water pump on/off located on pendant control and control box
Variable pressure and flow achieved by electronic-over-hydraulic controls at operators station
Handgun hose 3/8" x 75' w/operating pressure of 3500 psi and burst pressure of 14,500 psi, located in heated cabinet.

PD Vacuum System
Hibon 8702 Tri-Lobe ( 28" HG ) 5150 CFM @ Max. Speed 2000 RPM Ultra Quiet Inlet and Outlet Silencers Acoustically Matched to Blower
Direct Drive Omsi Transfer Case
Dual Cyclonic Separators with 12" clean out door
Microstrainer Final Filter with 3" Camlock drain
Vacuum relief located in the inlet of debris tank to allow operator to vent to atmosphere.  Pendant control operated.
Remote push button pendant control w/75' cable with a vacuum relief, water on/off and throttle control

Control Panel (Located Passengers Side)
Located inside an aluminum box for protection
The control panel will include:  Chassis Engine tachometer w/hourmeter, Blower tachometer, Blower temperature gauge, Mark III electronic low water indicator, circuit breakers, water pump on/off, Vacuum gauge, water pump pressure control
Boom control at operator's station, body lock, dump and door functions

Boom & Vacuum Hose
7' Hydraulic extendable boom/top mounted with 320 degrees of rotation
8" I.D. wire reinforced rubber suction hose 
Boom will have an electric-over-hydraulic solenoid system with speed flow control valves
Boom will be powered hydraulically up/down/right/left/extend/retract
Boom control, joystick and hand carried pendant control w/75' cable located at operator station
All boom inlet hose and tubing will be 8" inside diameter

Vacuum Pipe Package
Package will be 1- 8" x 7' aluminum fluidizer tube w/rubber safety end; 2 - 8" x 5 aluminum flanged pipe; 1 - 8" x 7' aluminum flanged pipe; 4 - 8" quick  clamps
All connections between debris body and vacuum system will be self-adjusting, pressure fitting type

Water System/Pipe Package
Includes 1 - Digging wand, 1 - dual nozzle assembly, 1 - triple nozzle & wash down nozzle

Water Heater
Water heater will be rated at 940,000 B.T.U.
12 Volt heater will have no flow/burner shutdown, electronic temperature control, heater inlet pressure gauge, LED temperature display

Hydraulic System
Hydraulic reservoir capacity of 50 gallons w/strainers on all suction lines. Oil level sight gauge
Inspection hatch for maintenance
10 micron spin on type filter

Entire system will be moisture and vapor sealed
Electrical connections require no exposure wires or terminals
Light bulbs will be shock mounted
Complete wiring diagram is provided with machine, circuit breakers are supplied

Storage Cabinets
1 - 50" x 30" deep x 24" high aluminum tool box located right behind cab/water pump and hose retractable handgun reel will be located in this box, box will be heated.

All metal surfaces shot blasted prior to painting
All metal surfaces will be phosphate washed prior to painting
Coated with a minimum of 2.5 mil primer
Painted with a minimum of 2.5 mil finish paint process
Module components will be painted prior to assembly

Tow hooks front and rear
Mud Flaps
Electronic back-up alarm

Debris Body
Folding Pipe Rack / Rear Door
Folding Pipe Rack / Street Side
Rear Door Splash Shield

Water Tank Accessories
Air Purge System Utilizing Chassis Air System
940,000 BTU water heater  Includes: inverter and chassis must have minimum 160 amp alternator
Cabinet Heater, Drain valve donut heater and Insulation Package

Boom Accessories
7 FT. Hydraulic Telescopic Boom W/180 Deg. Rotation

High Pressure Water Pump
20 GPM / 2500 PSI Water System
10 GPM Cold Weather Recirculation System  Front Crankshaft Driven 

Hose Reel Accessories
Hydraulic Tool Package

Front Station And Controls
Second operator station:  Includes additional hosereel rear mounted with second handgun, plumbing & fittings.

Light Accessories
Revolving Light Rear Mounted
Revolving Light Front Mounted 
Work Light At Operators Station (One Only)

Tool Box - Vactor & Chassis Accessories
18" wide x 24" deep x 48" high aluminum tool box
104" X LONG X 24" Deep X 24" High Aluminum Tool Box

Module - Imron
CAB COLOR:     White

2013 Kenworth T800 chassis, Cummins ISX12, 425HP, Eaton Fuller FRO-16210C

    Give Us A Call For More Sales & Rental Information

    All advertised prices exclude government fees and taxes, any finance charges, any dealer document preparation charge, and any emission testing charge. Vehicles are subject to prior sale. All advertised to be true but not guaranteed.