Available Inventory

2013 Vactor HXX HydroExcavator PD

Click Image to Enlarge

General Details:

EQ #:6473
VIN #:1NKDX4TX7DJ363214
Chassis:
2012 Kenworth T800
Engine:
Cummins ISX 15
Vacuum System:
Hibon 8702 Tri-Lobe ( 28" HG ) 5150 CFM
GPM / Pressure:
10 GPM @ 2500 PSI
GAWR:
84,000 lbs

Specifications:

2013 VACTOR Hydro-Excavator, EQ# 6473, having Positive Displacement (PD) Blower driven from chassis engine, 15 cubic yard debris  hopper and 1200 gallon water capacity

STANDARD EQUIPMENT
Hydro-Excavator Standard Module

Debris Body
15 Cubic yard volumetric debris body
Cylindrical design, 1/4" abrasion & corrosion resistant Ex-Ten steel
Flat style, 3/4 rear door, hinged at top w/replaceable neoprene seal
Vibrator mounting bracket only
Hydraulic rear door locking system with door grabber
Hydraulic rear door open & close system
6" Knife valve with 10' drain hose, cam-loc connector
8" Inspection port, Top mounted with ladder for easy access
Rear door support for operator safety
Font mounted hydraulic dump cylinder, 50 degree dump angle, power up/power down

Water Tanks
1200 Gallon capacity insulted, structural foam & polyethylene water tank Water tank separate from debris tank
Includes anti-siphon device & anti-splash valve w/25' water fill hose and connectors Water level sight gauge, Mark III electronic low water warning system
5 Year warranty against leaks

Water System   
Water system rated design is 10 gpm @ 2500 psi
Hydraulic operated Tri-plex piston water pump
Water pump on/off located on pendant control and control box
Variable pressure and flow achieved by electronic-over-hydraulic controls at operators station Handgun hose 3/8" x 75' w/operating pressure of 3500 psi and burst pressure of 14,500 psi, located in heated cabinet.

PD Vacuum System
Hibon 8702 Tri-Lobe ( 28" HG ) 5150 CFM @ Max. Speed 2000 RPM

Control Panel (Located Passengers Side)
Located inside an aluminum box for protection
Vansco-Electronic Package includes: chassis tachometer, operating mode, PTO mode, hydraulic oil temp indication, water temp indication, and blower temp indication.  E-Stops will disable vacuum, throttle chassis engine to idle, turn off water pump, and disable hydraulics.  E-Stops located at all HMI points (control panel, wireless remote, optional corded pendant).  IntelliView display includes Machine Functions and Diagnostics (Chassis and Module).

Boom & Vacuum Hose
7' Hydraulic extendable boom/top mounted with 320 degrees of rotation 8" I.D. wire reinforced rubber suction hose 
Boom will have an electric-over-hydraulic solenoid system with speed flow control valves Boom will be powered hydraulically up/down/right/left/extend/retract
Boom control, joystick and hand carried pendant control w/75' cable located at operator station All boom inlet hose and tubing will be 8" inside diameter

Vacuum Pipe Package
Package will be:
(1) 8" x 7' aluminum fluidizer tube with rubber safety end
(2) 8" x 6' aluminum flanged pipe
(2) 8" x 3' aluminum flanged pipe
(5) 8" quick clamps

All connections between debris body and vacuum system will be self-adjusting, pressure fitting type

Water System/Pipe Package
Includes:
(1) Digging wand
(1) dual nozzle assembly
(1) triple nozzle assembly
Quick couplers and shut-off valve
(3) Extension pipe assemblies totaling 20'


Hydraulic System
Hydraulic reservoir capacity of 50 gallons w/strainers on all suction lines. Oil level sight gauge
Inspection hatch for maintenance
10 micron spin on type filter

Electrical          
Entire system will be moisture and vapor sealed
Electrical connections require no exposure wires or terminals
Light bulbs will be shock mounted
Complete wiring diagram is provided with machine, circuit breakers are supplied

Storage Cabinets
(1) 50"L x 30"D x 30"H Aluminum tool box located behind cab passenger side. Water pump and retractable handgun hose reel will be located in this box.

Painting
All metal surfaces shot blasted prior to painting
All metal surfaces will be phosphate washed prior to painting
Coated with a minimum of 2.5 mil primer
Painted with a minimum of 2.5 mil finish paint process
Module components will be painted prior to assembly

Miscellaneous
Tow hooks front and rear
Mud Flaps
Electronic back-up alarm
Spring Loaded Ground Reel
Fenders
Factory Training and Start Up

Debris Body
Folding Pipe Rack / Street Side
Rear Door Splash Shield
Lube Manifold
Electric vibrator - debris body mounted
Sludge pump off-load system
Float ball screens - Perforated plastic

Water Tank Accessories
Air Purge System Utilizing Chassis Air System
940,000 BTU water heater  Includes: inverter and chassis must have minimum 160 amp alternator

Boom Accessories
7' Hydraulic telescopic boom w/320 degree rotation (Recommended option) Remote push button pendant control with 75' cable with a vacuum relief, water on/off and throttle control

High Pressure Water Pump
Cold Weather Package 3 - Includes PTO Cold Weather Recirculator & Antifreeze Tank

Front Station And Controls
Second operator station:  Includes additional hosereel rear mounted with second handgun, plumbing & fittings.  ( Front and Rear station, 10 gpm water pump is standard.)

Light Accessories
Signal-Master directional arrow, one-piece, 10 lights, FRONT only
Revolving Light Front Mounted 
Strobe light rear mounted
Work Light At Operators Station (One Only)
Work Lights On Extendable / Telescopic Boom (Two)
Work Light / Rear Door

Tool Box - Vactor & Chassis Accessories
18" wide x 24" deep x 48" high aluminum tool box, maximum of 2 per truck.  1 - located left side behind tandem, 1 - located right side behind tandem (Recommended Option- 1 Mounted on Right Side )

Paint
Module - Wet on Wet (Primer base)
BODY COLOR:  White
CAB COLOR:     White

Engine “Regeneration Mode” Warning System (IH ONLY)
Remote Mounted, Heated Water Tank Drain Valve
Large Drivers Side "Man" Cabinet

Chassis
2012 Kenworth T800 Tridrive, Cummins ISX15 525HP Engine, Eaton Fuller RTLO18918B Transmission

    888-936-4369
    Give Us A Call For More Sales & Rental Information

    All advertised prices exclude government fees and taxes, any finance charges, any dealer document preparation charge, and any emission testing charge. Vehicles are subject to prior sale. All advertised to be true but not guaranteed.