Available Inventory

2011 Vactor HXX Prodigy Air

Click Image to Enlarge

General Details:

EQ #:13595
VIN #:2NKHHJ7X7GM108924
Chassis:
2011 IH 7400 4X2
Engine:
Maxxforce
Vacuum System:
Roots 624
GPM / Pressure:
10 GPM @ 2500 PSI

Specifications:

2011 VACTOR "Prodigy" Hydro-Excavator having Positive Displacement (PD) Blower, EQ# 13595, driven from chassis engine, 6 cubic yard debris  hopper and 600 gallon water capacity

Debris Body
6 Cubic yard volumetric debris body
Cylindrical design, 1/4" abrasion & corrosion resistant Ex-Ten steel
Flat style, 3/4 rear door, hinged at top w/replaceable neoprene seal
Hydraulic rear door locking system 
Hydraulic rear door open & close system
6" Knife valve with 10' drain hose and Camlock connector
8" Inspection port, Top mounted with ladder for easy access
Rear door support prop for operator safety
Front mounted hydraulic dump cylinder, 50 degree dump angle, power 
up/power down
Dual 8"air ports with 10" stainless steel float ball shutoff 
system/stainless steel screens Rear loading port

Water Tanks
600 Gallon capacity - #304 3/16" stainless steel water tank
Water tank separate from debris tank
Includes anti-siphon device & anti-splash valve w/25' water fill hose and 
connectors
Electric water level indicator with low water warning system
10 Year warranty against corrosion and cracking

Water System   
Water system rated design is 10 gpm @ 2500 psi
Hydraulically operated triplex piston water pump with electronic flow 
management
Water pump on/off located on pendant control and control box
Electronic multiflow control
Handgun hose 3/8" x 75' w/operating pressure of 3500 psi and burst pressure of 14,500 psi, located in heated cabinet. Hose reel is auto rewind

Vacuum System
Roots 624 ( 16" HG ) 3200CFM @ Max. Speed 3000 RPM
Direct Drive Omsi Transfer Case
Single Cyclonic Separator with 13" clean out door
Cartridge type dual element final filter
Vacuum relief located at the inlet to the final filter to allow operator to vent to atmosphere.  Pendant control operated.
Remote push button pendant control w/75' cable with a vacuum relief, 
water on/off and throttle control
Control Panel (Located Passengers Side)
Located inside an aluminum box for protection
The control panel will include: e-stop, blower tachometer w/hourmeter, blower temperature gauge, vacuum gauge, vacuum relief switch, hydraulic oil temperature gauge, throttle control, water pump on/off, multiflow control switch, electric low water indicator, boom controls, body dump and door open/close functions, and circuit breakers

Vacuum Pipe Package
Package will be 1- 6" x 5' aluminum fluidizer tube w/rubber safety end; 3 
- 6" x 5' aluminum flanged pipe; 4 - 6" quick  clamps
All rubber boot connections between debris body and vacuum system will be self-adjusting and pressure fitting type

Water System/Pipe Package
Includes one hand gun, one digging wand, one dual nozzle assembly, one triple nozzle assembly, one fan nozzle assembly, quick couplers and shut-off valve, three extension pipe assemblies totaling 20 ft.

Hydraulic System
Hydraulic reservoir capacity of 50 gallons w/strainers on all suction lines.
Oil level sight gauges on hydraulic reservoir
Inspection port for maintenance 10 micron spin-on type filter

Electrical                                 
Entire system will be moisture and vapor sealed. All wires function stamped and color coded
Electrical connections require no exposure wires or terminals
Light bulbs will be shock mounted
Complete wiring diagram is provided with machine, circuit breakers are supplied
Storage Cabinets
1 - 50" x 30" deep x 30" high aluminum tool box located right behind cab/water pump and hose retractable handgun reel will be located in this box, box will be heated. Tool trays located above rear axle.
 
Painting
All metal surfaces shot blasted prior to painting
All metal surfaces will be phosphate washed prior to painting
Coated with a minimum of 2.5 mil primer
Painted with a minimum of 2.5 mil finish paint process
Module components will be painted prior to assembly

Additional items
Tow hooks front and rear
Mud Flaps
LED stop, turn, back-up, clearance and tail
Electronic back-up alarm - 97 dB(A)
Aluminum Fenders
25 ft Spring Loaded Ground Reel
Factory Training and Start-Up

Debris Body
6" Butterfly valve/rear door
Splash shield, rear door (Recommended option)
Lube manifold

Air Excavation Package
Boss Air Compressor - 185CFM/150PSI rotary screw air compressor with hourmeter, pressure gauge, oil temperature gauge, high pressure shutdown, and high temperature shutdown.
50 feet of  1" air hose with auto rewind reel
10 feet of 1" lightweight hose
Ergonomic trigger type handle with pressure display, 4' non-conductive lance, 3' non-conductive lance extension, blow back shield, and quick disconnect.
High efficiency nozzle sized to match compressor

Truck Mounted Boom
6" I.D. wire reinforced rubber suction hose 
Boom will have an electric-over-hydraulic solenoid system with speed flow control valves
Electric over hydraulic boom controls - up/down/right/left/extend/retract
Boom controls located on control panel(rocker switch) and hand carried pendant control

Extendable Boom
5' Hydraulic extendable boom w/320 degree rotation, total reach of 16.5' 
from center line (Recommended option)
 
Wireless Remote
Wireless remote control: boom functions, water pump on/off, throttle, estop, water flow, and vacuum relief
Air purge system utilizing chassis air system (Recommend option)

Water Heater
Water heater - 400,000 BTU/Hr

Cold Weather Package
Cabinet Heater, Drain valve donut heater and Insulation Package
High Pressure Water Pump
12 gpm cold weather recirculator system. 

Light Accessories
Handlight w/retractable reel (Recommended option)
Revolving light, rear only (Recommended option)
Revolving amber beacon light, front only (Recommended option)
Worklight at operator station (Recommended option) Worklights, rear door (Recommended option)

Tool Box - Vactor & Chassis Accessories
Winter Transport Preperation:  Kats UL8000 Temporary Coating with 
8077 Coatng Remover
68"L X 24"D X 24"H aluminum tool box mounted above rear axle  on Left Side (Recommended Option)  (Only if Air Compressor shall be not selected)
28"L X 26"D X 16"H aluminum tool box mounted below oil cooler - Left Side

Paint
Module - Centari (Primer base)
White
White

Engine “Regeneration Mode” Warning System

Chassis
2011 IH 7400 4X2 - Maxforce Engine, Allison 3000RDS Transmission

    888-936-4369
    Give Us A Call For More Sales & Rental Information

    All advertised prices exclude government fees and taxes, any finance charges, any dealer document preparation charge, and any emission testing charge. Vehicles are subject to prior sale. All advertised to be true but not guaranteed.