IBAK Controllers

IBAK Control Modules

The best equipment in the world demands a control system to match. What good would a race car be if you had to reach behind the seat to shift the transmission? Unfortunately many manufacturers do not take the time to solicit feedback from operators in the field like we do. As a result they construct controllers that, while easy to manufacture, are difficult to use and negatively impact productivity. IBAK has been manufacturing sewer inspection equipment for over 50 years and we’ve learned a lot about what makes a system easy to use and efficient. You can be sure that when you use IBAK equipment you are in control and getting the job done.

BK 3.5.1 Control Box

The IBAK BK 3.5.1 Control Box is easily transported in the box housing thanks to its compact design. Used either installed in an inspection vehicle as well as a portable unit, BK 3.5.1 facilitates the operation of IBAK inspection systems. All functions of the camera tractor and the camera can be controlled and operated using the two joysticks, the control buttons and the integrated keyboard. At the same time, the operating status of the individual system components is clearly indicated on a 5.7″ color display.

BS 3.5 Control System

The IBAK BS 3.5 is an operating system for IBAK inspection equipment for fixed installation in an inspection vehicle. Both these central control and operating units consist of an ergonomically designed control console (BP 3.5), a 19 in. rack mount and a keyboard. All current IBAK tractors, winches and cameras can be operated with either system, the connected components are automatically identified by the system.

BP 4 Control Console

The BP 4 is a compact control console with a daylight suitable, splash-proof monitor. The 10.4 in. display provides excellent picture quality. The T66 tractor and the Orion (in combination with KW104) can be operated in a user-friendly manner with both joysticks.

BP 4F Control Console

The BP 4F control console was especially developed for operation of the winch KW104 allowing for control of the IBAK GATOR Series of cutters and grinders . With this combination there is no need for a rack mount, because all electronic components are integrated either into the control console or into the KW104. The ergonomically designed control console contains a touch-screen and a conventional keyboard. The robot, tractor and the camera are operated in a user-friendly manner with both joysticks.

BS 5 Control System

The IBAK BS 5 is the central control and operating unit for permanently installed IBAK inspection systems. All current IBAK cameras and tractors can be operated using it. The camera tractor and the respective camera are controlled via the ergonomically-shaped console, with two joysticks, enclosing the PC keyboard.

BS 7 Control System

The IBAK BS 7 is an operating system for IBAK inspection equipment for fixed installation in an inspection vehicle. Both these central control and operating units consist of an ergonomically designed control console (BP 3.5), a 19″ rack mount and a keyboard. All current IBAK tractors, winches and cameras can be operated with either system, the connected components are automatically identified by the system.

Information Request

Rent
Rent-To-Purchase
Purchase
General Information

×
Information Request

Rent
Rent-To-Purchase
Purchase
General Information

×